Dual 7" 3RU IPS 1280x800 Broadcast LCD Rack Mount Monitor with 3G-SDI, HDMI, AV input and output D71

---

Display Spec.

Model	D71 (D71-H: W/O SDI)
Screen Size	7"×2 IPS
Resolution	1280×800 pixels
Dot pitch	0.117 (H)×0.117 (V) mm
Aspect Ratio	16:10
Brightness	400cd/m²
Contrast Ratio	800:1
Backlight	LED
Viewing Angle	89°/89°(L/R) 89°/89°(U/D)

 

Input (Each LCD)

1 X BNC	3G-SDI
1 X HDMI	HDMI
1 X BNC	Video
2 X RCA	Audio(L/R)

 

Output (Each LCD)

1 X BNC	3G-SDI
1 X HDMI	HDMI
1 X BNC	Video

Dual 7" 3RU Rack Monitors
D71 are extremely thin and lightweight. 7" 3RU Rack Monitors with dual 7” IPS 1080x800 screens, viewing SD, HD and 3G-SDI video on 3RU rack monitor.With GPIO for Software control via Ethernet connection. FEELWORLD Rack mount LCD monitor has been widely used in all levels of TV news production, post production, programme broadcasting and TV broadcasting trucks, special vehicles video surveillance and other fields. Since this series is working with other adjacent professional equipments, therefore, the high stability, high reliability and electromagnetic compatibility are very important conditions to make sure the whole system work smoothly.

Enjoy Consistent Images from Any Perspective
D71 uses an IPS panel, which provides a wide 178°/178° viewing angle and brightness output of up to 400nit. This means you’ll be able to see accurate, consistent and bright images from any point of view.

Easy to operate, time-saving
Consistent design style, the same function and operation mode setting is one of the features of the products. Users only need to know one product operation mode, you can operate the full range products, time-saving and convenient.

Network Control
D71 rack mount Monitor includes a LAN port,This allows the operator to Software control via Ethernet connection (software included). The rear panel LAN 100 port connects the unit to the LAN. Once connected, the user simply locates the IP address of any one of the units connected to the LAN. This is accomplished by going to the MAIN MENU of any of the connected units and selecting the NETWORK CONFIGURATION submenu. This willthen display the IP address of that unit. Simply type this IP address into the address bar of your Software. It is possible to poll your LAN for all other units connected by accessing the NETWORK tab from the Top Menu.