Rode Newsshooter Kit Microphone

PRODUCT HIGHLIGHTS

• - Includes Transmitter and Receiver
• - Series II, 2.4 GHz Digital Transmission
• - 128-Bit Encryption with 328' Range
• - 48V Phantom Power
• - Locking XLR & 3.5mm TRS Inputs
• - OLED Display on Receiver & Transmitter
• - One Button Pairing & 8-Channel Switching
• - 20 dB Attenuation Pad on Receiver
• - Powered by AA or Sony NP-F Batteries
• - Headphone Output on Transmitter
• 
  

• RODE Microphone Newsshooter Kit from RODE is a wireless system for ENG (Electronic News Gathering) using series II 2.4 GHz digital transmission and 128-bit encryption. The system is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 328'. Both units are battery powered and can run for up to seven hours. 

  The receiver (RX-CAM) features an OLED display with information on level, battery status, mute, and channel selection. Underneath the OLED display, you'll find a pad that can attenuate signals between 0 and -20 dB. The receiver can be mounted on a standard camera shoe-mount with a 3/8" thread or a belt-clip. Through its on-board, locking 3.5mm dual-mono jack, you can monitor and/or record audio signal.
  
  In addition to boasting its own OLED panel for monitoring battery and output level, the transmitter (TX-XLR) easily connects to XLR handheld presentation microphones as well as 3.5mm shotgun microphones and powered lavaliers. The transmitter provides 48V phantom power through its XLR input and plug-in power through the 3.5mm TRS input. If you're on the transmitting end of the signal, you can monitor the audio feed through its 3.5mm headphone jack.

  Please note, however, that you cannot operate two microphones at the same time. 

  With all the above features, the RODELink Newsshooter Kit provides everything you need to start shooting video wirelessly with microphones boasting XLR or 3.5mm connections, be they a dynamic handheld capsule, powered shotgun mic, or compatible lavalier. 

  The receiver can interface with up to eight different TX-XLR transmitters, and you can use the channel switcher to select between each individual transmitter; please note, however, that you can only receive audio actively from one transmitter at a time

  Compatible with any microphone sporting 3.5mm TRS or XLR connection points and necessitating power up to 48V

  Battery can last for up to seven hours

  Series II 2.4 GHz digital transmission with 128-bit encryption

  Transmitter supplies 48V phantom power and plug-in power

  Constantly monitors and hops between frequencies to maintain the strongest possible signal level at a range of up to 328'

  OLED display on receiver and transmitter with information on level, battery status, mutes, and channel selection 

  Mounts on a standard camera shoe-mount and for added versatility the shoe mount can be located in one of two positios

  General Specification
  

  Transmission Type	2.4 GHz fixed frequency agile system
  Dynamic Range	112 dB
  Range	Up to 328' / 100 m
  Frequency Range	35 Hz to 22 kHz
  Maximum Output Level	1 V Rms / 2.8 V P-p
  Maximum Input Level	1 V Rms / 2.8 V P-p
  Latency	Maximum: 4 ms

  Receiver

  Model Number	RX-CAM
  Power Source	2 X AA battery or Micro-USB
  Antenna	Internal
  Input Connections	1/8" / 3.5 mm TRS locking mini-jack - dual mono
  Input Impedance	300 Ohms
  Dimensions (H x W x D)	4.4 x 2.6 x 2.0" / 111 x 65 x 52 mm
  Weight	6.7 oz / 190 g

  Transsmitter
  

  Model Number	TX-XLR
  Power Source	2 X AA battery, Sony NP-F battery, or Micro-USB
  Phantom Power	Supplies 48 V through XLR input jack
  Plug-in power	Supplies plug-in power through 3.5 mm TRS jack
  Antenna	Internal
  Input Connections	XLR with locking collar 1/8" / 3.5 mm TRS locking mini-jack socket
  Input Impedance	XLR: 1 kOhm  3.5 mm TRS: 10 kOhms
  Dimensions (H x W x D)	4.7 x 1.8 x 1.8" / 120 x 45 x 45 mm
  Weight	7.8 oz / 222 g

  
  

  
  

•