Pocket Wizard Mini TT1 Transmitter For Nikon
PRODUCT HIGHLIGHTS
- On-Camera Hot Shoe
- 32 Channels, Multi-Zone
- High Speed Sync up to 1/8000th Sec.
- Triggers all PocketWizards
- USB Upgradeable
The PocketWizard MiniTT1 Radio Slave Transmitter is part of an ultra-versatile radio slave system, and is dedicated specifically to the Nikon i-TTL flash control system. It simply slides directly into the camera's hot shoe, and there are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units.
The MiniTT1 is the ideal addition to any Nikon i-TTL flash system. It works in combination with the FlexTT5 Transceiver, and since this system works on digital radio technology, it can support i-TTL operation around corners, out-of-sight, or in bright sunlight.
- 2 Channel Settings + Learn Mode
- Each setting can be programmed to support up to 20 ControlTL channels for TTL photography, or 32 standard channels for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch, which integrates with Nikon zones and ratios. The Learn Mode allows the unit to detect the channel used by any other unit in the area.
- Reverse Compatible
- Operates on the same channels as all other PocketWizards and will work with any unit you may already have.
- HyperSync & High-Speed Sync Technology
- Supports flash sync speeds of up to 1/500th sec. High-Speed Sync auto syncs flash system with the camera's shutter speed setting, up to 1/8000th.
- Built-in Hot Shoe
- Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional i-TTL control only.
- Low-Profile Design
- The MiniTT1 lies flat to stay out of the way and uses an internal antenna.
- Configurable and Upgradeable
- The MiniTT1 features a mini-USB port, which makes it upgradeable and "future-proof" for continuous improvements and compatibility upgrades.
- Important Information
- Units sold in USA use 344.0 MHz for channels 1-16, and 346.5-354.0 MHz for channels 17-32
- Units sold in Europe use 433.62 MHz for channels 1-16, and 434.22 for channels 17-32
- USA and Euro models cannot converse with each other
- USA models may interfere with devices in Europe
The PocketWizard MiniTT1 Radio Slave Transmitter is part of an ultra-versatile radio slave system, and is dedicated specifically to the Nikon i-TTL flash control system. It simply slides directly into the camera's hot shoe, and there are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units.
The MiniTT1 is the ideal addition to any Nikon i-TTL flash system. It works in combination with the FlexTT5 Transceiver, and since this system works on digital radio technology, it can support i-TTL operation around corners, out-of-sight, or in bright sunlight.
- 2 Channel Settings + Learn Mode
- Each setting can be programmed to support up to 20 ControlTL channels for TTL photography, or 32 standard channels for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch, which integrates with Nikon zones and ratios. The Learn Mode allows the unit to detect the channel used by any other unit in the area.
- Reverse Compatible
- Operates on the same channels as all other PocketWizards and will work with any unit you may already have.
- HyperSync & High-Speed Sync Technology
- Supports flash sync speeds of up to 1/500th sec. High-Speed Sync auto syncs flash system with the camera's shutter speed setting, up to 1/8000th.
- Built-in Hot Shoe
- Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional i-TTL control only.
- Low-Profile Design
- The MiniTT1 lies flat to stay out of the way and uses an internal antenna.
- Configurable and Upgradeable
- The MiniTT1 features a mini-USB port, which makes it upgradeable and "future-proof" for continuous improvements and compatibility upgrades.
- Important Information
- Units sold in USA use 344.0 MHz for channels 1-16, and 346.5-354.0 MHz for channels 17-32
- Units sold in Europe use 433.62 MHz for channels 1-16, and 434.22 for channels 17-32
- USA and Euro models cannot converse with each other
- USA models may interfere with devices in Europe
| Technical | |
| Warranty | 1 Year |
Gratis Ongkos Kirim
Dengan syarat dan ketentuan yang berlaku.
Cek Ketersediaan
Mohon hubungi CS kami atau Toko Terdekat, untuk detail ketersediaan stok barang.
-
Pocket Wizard
- Product Code: Wizard Mini TT1 Transmitter SKU No. : 18POC0005
- Availability: In Stock
- Rp. 500,000