AJA RovoRx-SDI UltraHD/HD HDBaseT To SDI

• 4x 6G/3G-SDI outputs support video and embedded audio for incredible multi-format compatibility
• 8-Channels (4 pairs) of SDI embedded audio supported
• DA Mode for distributing 6G/3G-SDI UltraHD and HD signals from HDBaseT sources
• HDMI simultaneous output for UltraHD and HD displays
• REF in/out that can be genlocked with other broadcast gear
• USB port for software configuration of SDI settings
• Power over HDBaseT (PoH), allowing RovoCam to be powered remotely from its physical location

RovoRx-SDI offers a lot of power for HDBaseT workflows, receiving uncompressed video and audio, offering bidirectional VISCA support and PoH for powering RovoCam, all across a single Cat 5e/6 cable. With multiple 6G/3G-SDI outputs as well as HDMI, your options for distribution of RovoCam's UltraHD or HD imagery simplify any project's needs.

• HDBaseT (RJ-45), Analog Video reference terminating Input
• 4x 6G/3G-SDI Outputs
• 1x HDMI 1.4 Output
• 1x RCA Stereo Output
• 1x REF In/Out 
• 1x 3.5mm TRS Input for RS-232 bidirectional signals
• 1x RS232 for RovoControl software

PoH or Power over HDBaseT is a lifesaver for those working on live events, in studios and other signal sensitive environments. By supplying RovoCam's power from a remote location, signal interference is mitigated and cabling is greatly simplified. RovoRx-SDI can provide power to RovoCam or to third party HDBaseT transmitters, all across a single category cable alongside video, audio and control signals. 

The RovoCam camera features an integrated HDBaseT transmitter. Not only does HDBaseT offer affordable long cable runs up to 100 meters over standard Cat 5e/6 cables, it also passes RovoCam’s beautiful UltraHD/HD imagery, audio, control of the camera, and power to the unit.

A single Cat 5e/6 cable carries all uncompressed video, 2-Channel audio, VISCA camera control, and power for the simplest installation ever due to RovoCam’s integrated HDBaseT interface.

RovoCam's Connectivity Includes: 

• 1x HDBaseT connector (RJ-45) allowing camera interaction and control, uncompressed video, audio and power all over one
  Cat 5e/6 cable
• 1x 3.5mm Mic audio input
• 1x 3.5mm RS-232 input
• 1x local power connector

Simple to Install. Simple to Operate.

Learn More

Note: Power and RS-232 connections on RovoCam are not needed if those functions are supplied by the HDBaseT interface.

Control and display RovoCam’s beautiful UltraHD/HD imagery remotely with RovoRX-HDMI and RovoControl. 

RovoRx-HDMI is an UltraHD/HD HDBaseT receiver with integrated HDMI video and audio outputs specifically designed to receive RovoCam’s output. Receive the RovoCam’s video and audio up to 100m away from the camera, and output to HDMI TVs and devices.

The HDBaseT connector on RovoRx-HDMI supports camera uncompressed video, audio, power, and control, all over a single Cat 5e/6 cable, greatly simplifying cabling and systems integration.

RovoRx-HDMI Connectivity Includes:

• 1x UltraHD/HD HDMI Output
• 1x Stereo RCA audio output
• 1x USB
• 1x RS-232 Bidirectional
• 1x HDBaseT connector (RJ-45) allowing for camera interaction, power, and control, all over one Cat 5e/6 cable